2015-03-02

turbocharger is an air compressor

The turbocharger is actually an air compressor , compressed air to increase the intake air quantity . It is the use of engine emissions inertia momentum to drive the turbine room of the turbine ,H beam Connecting Rods the turbine has led coaxial impeller, the impeller send sent by the air filter duct air into the cylinder so that the booster . When the engine speed increases quickly, and the speed of the turbine exhaust gases are synchronized faster speed , impeller to compress more air into the cylinder, pressure and density of the air increases to burn more fuel and adjusting the amount of fuel corresponding increase in engine speed , can increase the output power of the engine . Contest the general Formula One racing car or on the engine fitted with a turbocharger to make the car more power burst out . The engine is by fuel combustion in the cylinder to generate power , the amount of fuel input to the cylinder by the suction air quantity limits the generated power will be limited , if the performance of the engine has been running in an optimal state ,Auto Performance Parts then the output power increases by increasing the amount of fuel can be more compressed air into the cylinder , acting to improve the combustion capability . In the current technical conditions , the turbocharger is the only thing that can increase the power output of the engine to work efficiently under constant mechanical devices.
An exhaust turbocharger mounted on the engine side , so the high operating temperature of the turbocharger , the turbocharger and the rotational speed of the rotor during operation is very high , up to hundreds of thousands of revolutions per minute , so that high speed and temperature such common mechanical roller or ball bearings for the rotor will not work , thus the turbocharger generally used full floating bearing to be lubricated by the oil , there is a coolant for cooling the turbocharger . Previously, most of the turbocharger used in diesel engines, gasoline engines are also used several turbochargers . Because the combustion of petrol and diesel are not the same , www.maxspeedingrods.com so the engine with a turbocharger is also somewhat different form .

2015-03-02

Holset turbocharger is good?

When the booster Holset waters into the cryogenic air density becomes low and the ambient temperature becomes high, the compressor intake air becomes large , the energy obtained by the turbine is increased , so that the speed increases with the supercharger operating line move to the lower , the surge margin increases ; while in the hot waters of the contrary, that the surge margin decreases prone to surge .Turbocharger Kits The turbocharged diesel engine at low temperatures for some ships plying match turbocharged diesel engine without air cooler waters while sailing in high temperature or high temperature air coolers trade area with matching sailing in cold waters , due to the match between the two relationship changes, the operating point is easy to close the surge zone , causing the surge .
Holset turbocharger has four major advantages
1, to improve engine emissions . Turbo engine by improving combustion engine efficiency and reduce engine exhaust gas emissions of particulate matter and nitrogen oxides and other harmful components. Diesel engines meet Euro emission standards over two indispensable configuration.
2, to provide altitude compensation. Some of the high altitude,Aftermarket Auto Parts the higher the altitude , the thinner the air , the engine with a turbocharger can overcome altitude thin air caused by engine power drop.
3, to improve fuel economy, reduce fuel consumption. Due to better combustion engine with a turbocharger performance , fuel savings of 3% -5%.
4 , increase the engine power . In the case of constant engine displacement charge density can be increased , so that the engine can be more fuel injection, thereby increasing engine power, after installation of the booster engine power and torque to be increased by 20 % to 30 %. On the contrary , at the request of the same power output can reduce engine bore and narrow engine size and weight.

2015-02-26

Super Turbo conversion

Known as the world can be described as the father of SAAB car turbo turbine lordship world, its technologies and processes need to be described as the degree of difficult, but it 's turbo technology and the use of both in the same industry leading position. Now I want to say is a Chinese- Japanese pragmatic perfect, because he was in business for many years in Japan, the Japanese modification industry is very loving.Auto Performance Parts

My friend, he is to join the club last year, we modified the modification membership, as his thoughts on our club changed turbine technology and certainly the environment arising from the transformation of. At first he just asked us this SAAB9000CD whether his understanding on this issue on this topic we launched a series of chat , and communicate the results of the same opinion , then give me an order next , transforming his turbines booster . To this end I spent 10 days in the body to help him set it and turbo intercooler and other accessories, and he said that all the modifications in Beijing shop stroll and understanding, with I guess he has no faith, because in Beijing no successful precedent modified turbine , there is also a variety of reasons and put it to the demolition . Some said that the oil can not be resolved,Connecting Rods some take opium, and some say that violence cylinder . On this topic we have a series of exchanges, on the one hand I was afraid to take back unsold turbines , turbo M24 because it is big , and too few people to buy . Second , I personally have had work experience in modification of the turbine is not afraid of this issue . In fact I was confident on this project .
Then, after a few days , my phone rang, and a look at his phone , I take a business trip in Hong Kong, he said he asked a lot of converted stores , said to see this car plus turbo too , but did not dare plus , they all see the European car afraid , afraid to evaluate . He told me again , able to raise , not even a plus , he can compensate for my loss. To tell the truth I'm tired point , I said , there are any problems I lose to you, he saw a bit of confidence I say this , and then ask what I need to do a little from where he was . What I say here I was ready , and all data on this data and this car , I have a few of the psychological .

2015-02-26

Bora 1.8T transfiguration "GT"

Has a " driver's car ," the title of a listing on the Polaris has been a lot of young people of all ages to play cars , because the overall performance, the performance of Polaris itself has been quite outstanding , and on its overall performance, fairly balanced . Modification of this car , Tuning Parts the only point of decorative or modification, to really major surgery , very difficult. It is necessary to highlight a particular aspect of performance is easy , but once broke its own balance, more harm than good . Therefore, the Bora , in the assurance that the overall balance of more than further improve comprehensiveness , is the point modified .
Looks that express
All cars made TOPMIX full carbon fiber surround , visual effects, good , let Bora looks more aggressive , more aerodynamic requirements, speed and more stable. This is around the same time the overall weight and heat also has some help . Bora headlight has always been the most weaknesses. Lt Mans xenon lamp line to its shortcomings as a whole.
Further improve matching racing seats, Shock Absorbers steering wheel , pedals , carbon fiber door handles, carbon fiber interior trim and other components inside the cab of the car a lot of elegance to this end , from inside to outside , more attractive the more handsome . Sparco bucket racing chair even when not open fast , there 's the thrill of sport , of course , get it like you have no reason not to drive fast .

2015-02-15

Suite 660 horsepower carbon fiber modified McLaren 12C

German luxury car tuning company has recently launched a McLaren 12C DMC modification cases, for the car to install a carbon fiber appearance package, and the power system has been retuned.
Appearance,Tuning Parts the installation of a more aggressive front carbon fiber front lip, rear side of the body fitted with beading style side skirts, rich side lines. Body rear spoiler in the original basis, they added a piece spoiler. The exhaust system replaced with titanium material, ECU re-set after the engine's maximum power increase from the original 626 horsepower to 660 horsepower.
Modified version of the Audi R8 V10 release power up 750Ps
K.MAN recently launched a new modified version of the R8, R8 models all modifications done by the V10 version, H beam Connecting Rods according to the power output of the three different versions, with the highest output power version actually reached 750Ps (551Kw), than the default V10 R8's 532Ps (391Kw) improved 218Ps (160Kw).
Audi R8 is one of many pro-gaze brand of car modification products, excellent chassis, beautiful appearance and huge potential for conversion to become popular on the market. But for most companies, the Audi R8 conversion from most of the exterior, interior, and a slight performance boost, but overall performance is not much integration solutions. Adapted from famous manufacturers --Chiptrick city of Wuppertal in Germany do not think so, they think of the modified version of the Audi R8 should be the most important power upgrade, so it will introduce a new sub-brand K.MAN, while superior performance is the biggest surprise.
Established Chiptrick from Germany not long, but the introduction of numerous violent change of the product, especially for the adjustment of its power system has been very attractive place. K.MAN's recently launched a new modified version of the R8, R8 models all modifications done by the V10 version, according to the power output of the three different versions, with the highest output power version actually reached 750Ps (551Kw), than the default V10 R8 the 532Ps (391Kw) improved 218Ps (160Kw)! So very Aspect.

2015-02-15

DMC modified Mercedes-Benz G63 AMG

Recently, the renowned German tuner DMC released their new modification works,Aftermarket Auto Parts a power output up to 700 hp Benz G 63 AMG, after modification completely let the car turned into a "crazy beast."
The increase in power comes from long, DMC for the original Mercedes-Benz G 63 AMG 5.5-liter V8 twin-turbo engine replaced with a new piston, crankshaft, connecting rod and a sports exhaust system, plus the re-tune the ECU school, factory 544 hp power output rose vividly powerful 700 horsepower.

In addition to the power upgrade, DMC for the appearance of the Mercedes-Benz G 63 AMG also made a lot of improvements, replacement of the carbon fiber bonnet with air intakes exaggerated, more wild before and after the siege, as well as a wide body kit , so that the car looks murderous full. In addition, DMC also prepared,Turbocharger For Sale ranging from 23-25 inch forged aluminum wheels for the customers want to buy this car.

2015-02-10

2013 Nissan Juke Nismo converted output 225 horsepower

Nissan Juke surprisingly hot, especially in Europe, but the Juke NISMO version is subject to many consumers. With the 197-horsepower 1.6-liter engine, this model could be so popular is not surprising. Senner Tuning Juke NISMO tuning company will carry out a full range of improvements,Auto Performance Parts make it more beautiful and at the same time, the performance has also been upgraded.
Tuning chosen mainly black metallic paint and with some extra candy red paint in stark contrast. Adding carbon fiber mirror caps. Equipped with a set of 20-inch Barracuda Tzunamee wheels, tire size 255/30 R20. Senner also has installed a 35 mm lowering springs, the body center of gravity.
Power, provides a new ECU tuning,racing coilovers install a high performance air filter and stainless steel exhaust system, these updates make the maximum output power from a 197 Mali Yue Juke Nismo rose to 225 horsepower, reaching 14% of the growth.

Tuning Parts News

http://www.maxspeedingrods.com